This link leaves the site.

Haas Lathe Training – Salt Lake City, UT

 (TL/GT/SL/ST/DS Series)

MMT/Moncktons Machine Tools as basic classes intended for individuals that will setup and run a Haas lathe (GT/SL/ST/DS/TL Models). Operators should have general turning knowledge prior to taking any of the classes. Below are brief descriptions of each Salt Lake City Haas mill training course and what is covered in each class.

Please call or email the Training Coordinator at 801.8816.2221 or engineeringslc@mmtproductivity.com with any questions.

TL (*For TL Series Models)

The 1-day Basic Operator Class is intended for individuals that will setup and run a Haas Tool Room Lathe.  The course covers the use of the Haas control panel, download and upload of programs, the setting of tool geometry, the setting of work coordinate offsets and production set up and operation of the machine tool. The class also covers the IPS (Intuitive Programming System).

LOP (**For Haas GT/SL/ST/DS Models)

This 1-day Basic Operator class covers the use of the Haas control panel, download and upload of programs, the setting of tool geometry offsets, the setting of work coordinate offsets, production set up and operation of the machine tool.

LPRO (For all Haas Lathe Models)

This 2-day Basic Programming class is intended for individuals that use G-code to program Haas lathes.  The course covers program format, linear and circular interpolation, tool nose radius compensation and various canned cycles used for drilling, turning, boring and threading.

PREREQUISITE:  Operator must have completed the Basic Lathe Operator class or equivalent training/experience prior to taking the Lathe Programming class.

Available Classes:

TL (*For TL Series Models)

Dates coming soon.

LOP (**For Haas GT/SL/ST/DS Models)

Dates coming soon.

LPRO (For all Haas Lathe Models)

Dates coming soon.

To register, email the training department at engineeringslc@mmtproductivity.com.

Online Ordering