This link leaves the site.

Haas Mill Training – Salt Lake City, UT

TM/VF/VM/MiniMill/EC/UMC/GR Series

Haas mill classes are basic classes intended for individuals that will setup and run a Haas Mill (VF/VM/MiniMill/EC/UMC/TM Series). Operators should have general machining knowledge prior to taking any of the classes. Below are brief descriptions of each Salt Lake City Haas mill training course and what is covered in each class.

Please call or email the training department at 801.8816.2221 or engineeringslc@mmtproductivity.com with any questions.

MOP (**For VF/VM/UMC/EC/Mini Mill/GR Series Models)

The 1-day Basic Operator class is intended for individuals that will setup and run a Haas mill. The course covers use of the Haas control panel,  download and upload of programs, the setting of  tool length offsets, the setting of  work coordinate offsets and production set up and operation of the machine tool.

MPRO (For all Haas Mills)

This 2-day Basic Programming class is intended for individuals that use G-code to program Haas mills. The course covers program format, linear and circular interpolation, tool nose radius compensation and various canned cycle used for drilling, tapping, boring, pocket milling and threading.

PREREQUISITE:  Operator must have completed the Basic Mill Operator class or equivalent training/experience prior to taking the Mill Programming class.

WIPS (For all Haas Mills equipped with WIPS Probe)

This 1-day Probe class is a six-hour course designed for individuals that use Wireless Intuitive Probe System for setting tool length offsets and work offset coordinates. Calibration of the probe system is reviewed. Course does not cover using probes to measure features such as diameters, overall length, etc. on piece parts.

PREREQUISITE:  Operator must have completed the Basic Mill Operator class or equivalent training/experience prior to taking the WIPS Probe.

Online Ordering